why does my brita water taste bad

If you want to improve the taste, you must decide to Brita water filter to improve the taste of water.  But at that time, if you still notice the bad taste of water, then what are the reasons behind it.

Reasons to bad taste water

Follow the filter preparation instructions

Before installing the filter, the preparation of the filter must follow. A Brita filter is different from coffee and sediment filters. The carbon is its purifying material. The carbon filters have small holes and mostly they fill with air and dust. So, rinse the filter before installing.

Soaked the filter and then install

The filter life is more than one year. Before installing, soak the filter for up to 15 minutes. Its purpose is to remove dust and air from carbon filters. After soaked, remove the extra water from it and easily install the filter.

Brita filter may not able to remove bad taste

All filters are not equal. Brita filter will not eliminate all the harmful contaminants. The removal of contaminants includes chlorine, copper, benzene, etc. But there are impurities that cause bad taste and this filter not able to remove them.

Read Reviews about

Berkey vs Alexapure

Berkey vs Brita

Berkey Vs Zero Water

Big Berkey vs royal Berkey

Propur Vs Berkey

Use water softener if incoming water has not bad taste

If the water from the initial point tastes good then it goes to the water lines and becomes bad taste. In this situation, there is no need for a Brita water filter. Use water softener for the good taste of water.

Step to do when water still bad taste even with a Brita water filter

If you find that water taste still remains bad after checking all things. Then you need to test the water contaminants through the water test kit. To best remove bad taste water, use a reverse osmosis system than a Brita water filter.

Why Does My Brita Water Taste Bad

The water after cleaning in the filter became bitter. Dealing with the problem

The last thing you want to deal with after buying a water filter or replacing cartridges is an unpleasant bitter taste. Moreover, it is felt not only by you, but also by your family, so that the version of the presence of paranoid inclinations can be safely put aside. Let’s try to consider various reasons why the water is bitter after passing through the filter.

Out of habit

This is the simplest explanation you can hear from any water filter manufacturer. Say, you used to drink water enriched with a variety of salts, but after installing the treatment equipment, its quality has improved, and you feel a foreign taste out of habit.

It is quite simple to check whether it is the whims of your body or you are objective in your judgments: Invite your family to compare the taste of water after the filter with the taste of bottled water. It is important that the water is served in the same glasses and at the same temperature. Only you will know where the sample is. If everyone agrees that the samples are the same, then your statement that the water after the filter is bitter is incorrect. Take it easy, and soon you will no longer notice the non-existent bitter taste.

Incorrect cartridge

The chemical composition of tap water, even within a small town, can vary significantly. Therefore, when choosing a filter cartridge, you need to build on the individual indicators of water flowing from your own tap. Ideally, you need to give water for chemical analysis. Making decisions on the advice of a friend across town is wrong.

Search for the culprit of bitterness

Modern filters have several stages of cleaning. It often happens that the culprit of unpleasant bitterness in water can be identified by simply going through the cartridges. It is necessary to remove one of the filter elements one by one, and immediately after that, carry out a tasting. At a certain stage, the water will no longer have a bitter taste – this will serve as a signal that the source has been found. They can be a cartridge with ion exchange resin or activated carbon.

Ion exchange resin

As you know, ion exchange loading is used to soften water by replacing magnesium and calcium ions (responsible for increased water hardness) with sodium ions. It often happens that the characteristics of the ion-exchange resin do not provide complete substitution of the corresponding cations, and magnesium chlorides and sulfates remain in solution, which cause the bitter taste of water. To avoid this, it is necessary to purchase a stronger cartridge or radically change the approach to water treatment.

It also happens that the salts responsible for bitterness in pure filtered water have shown themselves for the simple reason that they were previously masked by other substances. As soon as they disappeared thanks to the ion exchange resin, the bitterness showed itself in all its glory. The way out is to change cartridges or switch to reverse osmosis systems.

Activated carbon

The activated carbon cartridge copes with several tasks at once: it cleans water from organic matter, is responsible for the taste, color, and smell of water. In fact, it is activated carbon that is responsible for organoleptic characteristics in flow systems. But the quality of such cartridges may vary from manufacturer to manufacturer. There is a difference in the raw materials used, and differences in production technology, and the type in which the coal loading is presented. Often our choice is driven by the price, and we choose the cheapest options. Sometimes this is justified, but it happens that the result of our choice is bitter water flowing from the faucet after the filter.

FINAL Verdict

| compile the 10 errors below which we make when buying a water filter:

1. Not knowing the quality of the water entering your home

2. Not having previously informed about existing filtering technologies (and minimally understanding them)

3. Being blindly “advised” by a commercial agent

4. Not being clear about your real needs

5. Not having done a basic long-term calculation (5 years)

6. Not having been informed about the company that will sell us the equipment or about the manufacturer

7. Not being clear about the risk involved in poor maintenance of your filter

8. Not knowing your own indoor facilities

9. Have little “serious” reasons for deciding to install a water filter

10. Not taking into account the environment

As you can see, the most common mistakes have to do with rushing and misinforming yourself.