How to remove rust from water
Over time, iron oxide may begin to form inside the pipes in our homes. This usually occurs when metals such as steel or iron erode in the presence of moisture. Although, the negative effects of the presence of water oxide on our health have not yet been demonstrated. It is clear that nobody likes to see how the water in your house turns yellow, red or brown.
We tell you how to get water in rust. As well as the reasons why it occurs and how to detect it. In any case, remember that before any incident with your plumbing installation it is best to contact a trusted plumber. In this way you can solve any problem and anticipate more serious breakdowns. Be sure to contact our plumbers if you think there is rust in the water in your home or business.
Why is there rust in the water?
Before putting forward the reasons why there may be iron oxide in the water in your pipes. It is important to note that it is relatively normal. Since rust can appear anywhere in a plumbing installation as long as there is iron or steel and the presence of moisture. A priori it does not imply a serious problem. Although it is true that in the long term many other associated problems may appear.
For more you can check Top 10 Best Water Purifier
The main reason for rust to appear on any metal is its normal deterioration in an environment with water or high humidity levels. So it can appear at any point in our plumbing system. Therefore, the corrosion and deterioration of the pipes over time is usually the origin of the presence of this element in household water.
However, there are times when we have to look for the origin of the problem outside the limits of our home. Since it can also be due to a problem in the municipal pipes or in the water collectors. Or that being inside our facility does not have so much to do with the pipes. As with the accumulation of deposits in the domestic hot water heater. So you will need to have the work of an expert in boiler and heater repairs.
How to know if there is rust in the water from our taps?
Although with the passage of time there are several indications that can indicate that the water in our installation contains iron oxide. It is a very recognizable fact from almost the first moment. This is because rust tends to stain the water in a very recognizable way. Its tints vary from light yellow to brown, through orange and red. We tell you what these colors depend on.
The yellow color is a clear indication that the water contains small amounts of iron oxide. This tone, usually clear, arises from the contact between the metal of the pipe and the oxygen in the water. It is usually the first indication of a problem with the presence of iron oxide in the pipes of our home. Although we may not notice any other effect of the presence of this element. If we detect that the water has turned yellow it is advisable to contact a plumber.
When the yellow color disappears and gives way to other tones such as orange, red and brown. There is no longer any doubt that water contains iron oxide. Since this is a clear indication of a high concentration of iron and oxygen. Although it should be noted that the brown color can also indicate the presence of sulfur dioxide in our installation.
How does the presence of iron oxide in water affect our life?
As we have mentioned before, we should not be overly alarmed by the effects of rust in water on our health . Since it has not yet been shown to have long-term side effects. However, iron oxide in water does pose a problem for our home and its equipment. So we can talk about different side effects of this element depending on what it affects.
First of all, we have to say that it is not pleasant that the tap water has some color and that it is not transparent as it should be. In addition, in the long run it is common for the water to begin to have a certain unpleasant taste of metal. On the other hand, when there is rust it means that there is corrosion in the pipes. So this can pose serious problems for the installation. Such as the deterioration of the pipes and the appearance of water leaks or fissures .
Additionally, iron oxide from entering household machines such as dishwashers and washing machines can cause problems that make performance worse. In addition to leaving stains on laundry due to the dye present in the water caused by iron oxide.
Tips for removing iron oxide from water
The best way to take action when we notice that there is rust in the water in our pipes is to contact an urgent plumber. Different measures can be taken depending on the severity of the problem. So the first thing a professional will do is try to find out if the origin of the problem is in the installation of the house. Or if on the contrary, it comes from the municipal supply.
In case the problem is inside the house. It will be necessary to clean the pipes or do a treatment, repair or replacement of the affected areas. Be aware that when a lot of rust has formed in a pipe conduit, a clog can occur. So it is common to find cases in which low water pressure is added to the problem. In these situations the best option is to replace the pipes.
When the problem is in the supply network. The quickest thing is to contact the person in charge of the municipality so that they can solve it as soon as possible. Meanwhile you can use filters on the taps. And when in doubt, do not consume tap water if you are suspicious.